Item # UFE-112   $800

Full Image

Perfecta Arquati

Pneumatic Underpinner / V-Nailer

This unit is in working condition, coming from a frame shop which closed it doors a few months ago.

It had been in storage for 7 years. It came with the frame shop which was bought by current owner 7 years ago. They never used it. They tested it recently, and said that It has a small air leak, but works. They are not sure whether the leak is normal (overflow valve?) or not. Compressor cycles about every 5 minutes. 

This item can be picked up in the Joplin, Missouri area or shipped for an additional fee by common carrier. Shipping is not the $6.50 default on the order page.

PJ-8152008-Oklahoma

Sold 10-9-08-OK  Return Home

   Item # UFE-113   $800

Full Image

Morso Chopper

This unit is in working condition, coming from a frame shop which closed it doors a few months ago

w/ 60" measuring arm...vertical brace for end of measuring arm is missing.

This item can be picked up in the Joplin, Missouri area or shipped for an additional fee by common carrier. Shipping is not the $6.50 default on the order page.

PJ-8152008-Oklahoma

Sold 10-9-08   Return Home

(Retails new for $6,700) 

Item # UFE-114   $3,500

Full Image

Ledsome 12" Mitre Saw

This unit comes from a framing shop which went out of business. Bought new, ... saw was used for about 1 1/2 years in a low volume frame shop. It is in excellent condition.

Following info is from manufacturer's website:

The Model #1000 12" Double Mitre Saw is a wood saw with a 4-1/4" cutting capacity -- a full 1" more than some other 12" saws. The Model #1000 gives you the same perfect 45 mitre as our other models but we have taken some of the extra cost off. The Model #1000 is equipped with one set of 90-tooth lazer blades - the finest mitre blade available - one production stop, a 60" stainless measuring scale (increments of 1/8"), one chipbreaker, ...The Model #1000 runs two 1-HP, 3450 RPM motors on single-phase 220 electricity and it is foot operated.  Optional equipment available includes a 120” scale.  Saw vac included.  

Specifications & more info for this saw can be found on the manufacturers website at: www.ledsome.com/12saws.htm

This item can be picked up or shipped for an additional fee by common carrier. Shipping is not the $6.50 default on the order page.

TIMTISHANC1-7-/2009

Sold 3-16-09    Return Home

(List price new $4,687)

Item # UFE-115   $1,650

Full Image

Mitre - Mite VN42

ITW Pneumatic Under-pinner / V-Nailer

This unit comes from a framing shop which went out of business. Bought new, ... saw was used for about 1 1/2 years in a low volume frame shop. It is in excellent condition. Have not even used up the original 6 boxes of v-nails that came with machine)

Following info / specifications are from manufacturer's or Distributors website:

The Mitre-Mite VN 42 has been designed for ease of operation and is particularly well suited for assembling larger frames. This machine comes with a height adjustable base and has a convenient tilt / roll feature which allows for easy movement around the shop. it can be operated from the front or back and has a dual stage foot pedal which allows the Framer to see if the corner is properly aligned before nailing. After the Framer sets the stops, the hand lever is then used to position the nail head for driving or stacking V-Nails anywhere along the frame joint.

Specifications:

• MACHINE SIZE:
  • Width 14"
  • Length 19"
  • Height 33" to 43"
  • Weight 150 lbs.
• POWER SOURCE: Pneumatic
• FRAMING CAPABILITY:
  • Frame Width 3/8" to 5 1/2"
  • Frame Height 1/4" to 41/2"
  • Tilt/Angle fence for custom fit
  • 4 , 6, or 8 sided frames.
• V-NAIL SIZES: 3, 5, 7, 10, 12, 15 mm
• OPTIONAL ACCESSORIES:
  • Wood support table
  • Metal extension wings

This item can be picked up or shipped for an additional fee by UPS. Shipping is not the $6.50 default on the order page.

TIMTISHANC1-7-/2009

Sold 3-11-09   Return Home

   Item # UFE-116   $50  per Vice

Full Image

6" Framing Vices

4 Frame Corner Vices Available

United Manufactures Brand - Jaws open to 5 3/4"

These units are in excellent condition, coming from a framing shop which closed it doors several months ago.  

This item can be picked up or shipped for an additional fee by UPS. Shipping is not the $6.50 default on the order page.

TIMTISHANC1-7-/2009

Sold 4-8-09     Return Home

   Item # UFE-117   $750

Full Image

Morso Chopper

This unit is in good working condition. This cutter was purchased used for a frame shop several years ago; used a few month and has been in storage since then.

w/ 60" measuring arm, and extra blade

This item can be picked up in the Atlanta, Georgia area, or shipped for an additional fee by UPS. Shipping is not the $6.50 default on the order page.

RBETHEL-LAW-GA-1-20-09

Sold 2-20-08    Return Home